Tips For Replacing a Window Handle
It is easy to replace your window handle in the comfort of your home. Follow these steps to ensure an elegant and smooth finish.
Take off the screw covers from your uPVC handle to expose the screws. Then measure the spindle length to ensure that you get the correct size replacement.
1. Take a measurement of the Spindle Length
When replacing a window handle it's crucial to determine the size of the spindle correct. It could influence the tightness or looseness of the handle, as well as whether the handle locks correctly into the frame of the window. The spindle is a metallic shaft that connects the handle to the lock inside the window frame. The spindle can be found in the standard 8mm cross-section for industry or older versions that measure 9mm. door handles repair near me are 8mm but it wasn't always that way. It is important to check the measurements when purchasing a new handle.
Take the handle off. This is easily done by turning the handle into the open position and taking off two screws that keep the handle in place (which are usually concealed behind plastic caps that must be removed). Once the handle has been removed, take a measurement from the base to the point at which it ends. This will give you the measurement required to buy a replacement.
There are many options when it comes to selecting the right window handle from sleek chrome that blends into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curved monkey tail latches! There are many options to choose from, but the most important is to pick one that complements your home's style.
Espag handles are generally installed to uPVC windows and are always identical in size, with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Window handles made of Cadenza have a different size as they feature an bent blade that is used to operate a multi-point lock mechanism inside the window.
When selecting a window handle take into consideration the hand you use to open your door. Inline Espag window handles aren't handed and can be used for left or right handed windows. Cranked window handles are only used for windows that open in one direction.
2. Remove the Handle
A window handle that is sagging can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is that replacing a uPVC window handle is a very easy task you can complete yourself. All you need are the most basic tools and a bit of time to complete the job.
First, you have to open the window and ensure that it is in an unlocked position. Then, you need to remove the screw caps that hold the handle in place. Once these are removed, you can begin working on the removal of the handle itself.
The handle is connected to a spindle within the window frame. Depending on the type, this is held in place either by a screw or a pin. The most common handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are available on casement windows, including aluminium ones. You can lock the handles with a key in order to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.
To remove the handle, you will require a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. Once the handle that was previously used has been removed, you'll have to determine the length of the spindle and ensure that the new handle is a good fit.
Once you have the correct size, you are able to screw the new handle in place. It is crucial to ensure that the handle is properly attached and rotates in the proper direction (clockwise when the handle is open and counterclockwise if handle closes). It is essential to ensure that the handle hasn't been installed upside down.
Then, you must replace the screw cap caps. Once you've completed this step, you should test the handle to make sure it's functioning properly. Also, you should test the locking mechanism by moving the handle from the locked position, and then returning it to the locked position.
3. Take off the Screws
A uPVC handle is an important element of any home and is the first thing to show signs of wear or damage. This can be caused by natural causes or from regular use, or malicious damage caused by opportunistic criminals who seek to open a closed window and gain entry to your property. A simple replacement can solve the problem and prevent it from repeating itself.
uPVC handles could also be difficult to remove if the locking mechanisms are not functioning correctly. It is often possible to fix the problem by replacing the multipoint locking mechanism, rather than the whole handle. This could save you money.
After you have removed the handle, you will need to remove any screws that secured it. These are typically located on the inside face of the base of the handle. You may require an screwdriver to do this, and it's essential that you don't over tighten, as this could cause the handle to become loose.
You'll then have to locate the fixing pins or screws that hold the new handle in the correct position. They're usually on the inside of the handle base. You'll require a screwdriver to remove them. If you want to replace them, you should replace the caps on the screw and test the handle to ensure it functions properly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. If you want to replace the screw covers make sure that the handle is in a slack position and any screws are securely fixed. Then you can enjoy the new window handle. We hope this will allow you to avoid the need for expensive window and door replacement services in the future. If you'd like to get more help in this, or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the new handle
The procedure of replacing a damaged window handle or updating it is easy and can be accomplished in a few easy steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll require to complete the task are key. Always consider the safety of your windows and tools. It's also important to be patient and follow the steps carefully to ensure that you have a functional handle that is safe to use.
To begin, locate the screws that hold your window handle in place. Take them off while holding the handle firmly to stop it from falling and causing an injury. After the screws have been removed, they can be placed in a secure location to be replaced in the future.
After the handle that was used previously is removed, you can now begin to install the new one. It is important that the handle is fitted perfectly to ensure it functions correctly and locks the window in position. The next step is to slide the metal square on the back of the handle into the hole in the window mechanism, ensuring that it fits securely.
After your new handle is in place, the final thing to do is replace the screw caps and test it to make sure it works. If you're not satisfied with the result or if your window doesn't open and close as it should then the next step is to call our experts who can assist you.
Almost all UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. The procedure is fairly simple and can be completed by anyone with some knowledge of DIY. The most important factor in the success of this procedure is ensuring that you're using a replacement handle which matches your window's dimensions and style. If you're not sure what kind of handle you'll require, don't hesitate to contact our team who can provide you with the possibilities available.